WEDGE24Alphanumeric Keysi'#"ki'#"ki'#"ki'#"kThe reader can be used with terminals or PCs with various keyboard types andnationalities through a simple keyboard setting procedureThe type of computer or terminal must be selected before activating the keyboardsetting command.Keyboard setting consists of communicating to the reader how to send datacorresponding to the keyboard used in the application. The keys must be set in aspecific order.Press and release a key to set it.Some characters may require more than one key pressed simultaneously duringnormal use (refer to the manual of your PC or terminal for keyboard use). The exactsequence must be indicated to the reader in this case pressing and releasing thedifferent keys.Example:If one has to press the "Shift" and "4" keys simultaneously on the keyboard totransmit the character "$" to the video, to set the "$", press and release "Shift" thenpress and release "4".Each pressed and released key must generate an acoustic signal on the reader,otherwise repress the key. Never press more than one key at the same time, even ifthis corresponds to the normal use of your keyboard.Press "Backspace" to correct a wrong key entry. In this case the reader emits 2beeps.Note: "CAPS LOCK" and "NUM LOCK" must be off before starting thekeyboard setting procedure. "SHIFT" must be repressed for each characterand cannot be substituted by "CAPS LOCK".Read the "Alphanumeric Keys" code.Press the keys shown in the following table according to their numerical order: