Datalogic MX-E Series Hardware Manual
                                                                                                                        | |
Contents
| 
M6xx Camera Connection MX-E Series Hardware GuideDatalogic S.r.l. 44M6xx Camera ConnectionTo connect M6xx camera trigger signals and strobe outputs, use cable 606-0674-xx (6 pinHirose Male to DB9) with terminal block 661-0399.NOTE 1: If Camera Trigger In requires a sinking signal, set the Software Trigger Event to Rising Edge. If it requires asourcing signal, set the Software Trigger Event to Falling Edge.NOTE 2: If Strobe Trigger Output requires a sinking signal, set the Strobe Trigger Output to Falling Edge. If it requires asourcing signal, set the Strobe Trigger Output to Rising Edge.NOTE 3: Disconnecting the camera will turn on some strobe lights.Terminal Name Signal NotesOptional CameraPowerDO NOT USE Do NOT apply power to this terminal ifPower is supplied by Power overEthernet (PoE ; enable/disable inVPM-Settings )Optional CameraPower GroundDO NOT USE Not required if Ground is supplied byPower Over Ethernet (PoE; enable/disablein VPM-Settings )I/O Ground I/O GroundTrigger In** Camera Trigger In 0 to +24 VDC (recommendedMaximum +24 VDCAs sinking inputOff: 0 to + 0.5 VDCOn: +3.3 to +24 VDC; 5 to 15 maAs sourcing input (see Trigger Pullup +VCC)Off: +3.3 to +24 VDC; 5 to 15 maOn: 0 to + 0.5 VDCTrigger Pullup+VCC**Trigger In Pullup - use ifTrigger In needs sourc-ing (see Note 1 below)+24 VDC recommendedMaximum +24 VDC(**Block contains 1.6k Ohm 1W resistor between Trigger In andTrigger Pullup +VCC)Strobe OutputPullup +VCC*Strobe Supply Voltage -use if Strobe TriggerOutput needs sourcing(see Note 2 below)Based on Strobe requirement (optional)Max: +30 VDC; 50 ma(*Block contains 1.6k Ohm 1W resistor between Strobe TriggerOutput and Strobe Output Pullup +VCC)Strobe TriggerOutput*Trigger Out to Strobe(see Note 3 below)DO NOT APPLY ANY VOLTAGE DIRECTLY TO THIS OUTPUT.DO NOT WIRE OUTPUTS IN PARALLEL. |
Related manuals for Datalogic E1 Series
manualsdatabase
Your AI-powered manual search engine