Datalogic Memor User Manual

Also see for Memor: User manual User manual User manual User manual User manual

Contents

Datalogic Memor User Manual Manual pdf 69 page image

MAINTENANCE 44.2 CHARGING THE BATTERY PACKThe battery pack autonomy varies according to factors, such as the frequencyof barcode scanning, RF usage, etc.The battery icon on the Taskbar indicates when the battery pack is low.It is possible to recharge the battery pack by connecting the power supplydirectly to the Datalogic Memor™.Alternatively, it is also possible to recharge the battery pack by using a SingleCradle.Moreover recharging is possible by USB Direct connection with the hostcomputer, but with longer charging times and in this case it is advised to keepthe mobile computer off.During the charging process the LED positioned at the right side of the displayis red constant. Once the charging process has been completed this LED isgreen constant (see par. 3.4).If the battery pack is removed from the mobile computer, it can be recharged byinserting it into the rear slot of a Single Cradle.NOTEThe battery pack autonomy varies according to many factors,such as the frequency of barcode scanning, RF usage, batterylife, storage, environmental conditions, etc.CAUTIONIf the battery pack is new or has not been recharged for along time, it is necessary to perform two or three chargingand discharging cycles (complete use) before it can reachits maximum charge capability.The maximum time required to recharge a completely run-down standard battery pack is about 3 hours.NOTEEven if the storage temperature range is wider, In order toachieve the longest battery life, store the terminal and thespare batteries between 20 to 30 ºC (68 to 86 ºF).The Batteries must be charged at a temperature rangingfrom 0° to +45 °C (+32° to +113 °F).49