USE AND FUNCTIONING3544.2.2 Imager Data CaptureThe Datalogic Memor Imager captures a picture of the entire bar code. The omni-directional scanning does not require that the operator orient the bar code to alignwith the scan pattern.To read a 1D or 2D code, simply point the Datalogic Memor Imager model onto thecode and press the SCAN Key or the pistol trigger.The Datalogic Memor Imager uses an intelligent aiming system pattern, similar tothose on cameras, indicating the field of view, which should be positioned over thecode:Aiming SystemIf the aiming system pattern is centered over the entire symbology as shown in thefollowing figure, either wait for the timeout or release the Scan key or the trigger tocapture the image.A red beam illuminates the code, which is captured and decoded. You will get a goodread.
