Datalogic OM-GRYPHON SERIES Quick Reference

Also see for OM-GRYPHON SERIES: Quick reference Quick reference

Contents

Datalogic OM-GRYPHON SERIES Quick Reference Manual pdf 23 page image

OM-GRYPHON™19COPY CONFIGURATIONThis procedure allows using a previously configured Gryphon™ M reader(Master) to send its configuration directly to other devices of the same type(Slaves) by means of a single OM-GRYPHON™.Proceed as follows:With the master Gryphon™ M (correctly configured reader), read theCopy Configuration barcode below. Then, place it onto theOM-GRYPHON™ cradle within 10 seconds. The reader will beepindicating the configuration has been copied.Copy ConfigurationÌ$+ZZ0$-*Î1.2. With the slave Gryphon™ M, read the Get Configuration barcodebelow. Then place it onto the same OM-GRYPHON™ cradle used inthe step above. The slave reader's address will not be changed.Get ConfigurationÌ$+ZZ2$-4ÎThe configuration will be copied from the master to the slaveGryphon™ M. The slave Gryphon™ M signals the end of theprocedure with a series of beeps.3. Repeat the procedure above to configure other slave readers. TheOM-GRYPHON™ can continue to configure slave readers until itreceives another command.NOTEThis procedure does not require connection to a PC, howeverby connecting the RS232 interface cable to theOM-GRYPHON™ the copied configuration will be sent to thePC.