Product Reference Guide 1732D SYMBOLOGIES2D Global Features2D Maximum Decoding Time onpage 1742D Normal/Inverse SymbolControl on page 1752D Structured Append on page 175The reader supports the following 2D symbologies (bar code types). Sym-bology-dependent options for each symbology are included in this chapter.See "1D Symbologies" starting on page 81 for configuration of 1D bar codes.Aztec Code on page 176 Micro PDF417 on page 192China Sensible Code on page 179 QR Code on page 195Data Matrix on page 182 Micro QR Code on page 197Maxicode on page 186 UCC Composite on page 200PDF417 on page 189 Postal Code Selection on page 2022D Global FeaturesThe following features are common to all, or in some cases, most of theavailable 2D symbologies. Default settings are indicated at each feature/option with a green arrow. Also reference Appendix C, Standard Defaults fora listing of the most widely used set of standard factory settings. That sec-tion also provides space to record any custom settings needed or imple-mented for your system.To set most features:1. Scan the ENTER/EXIT PROGRAMMING bar code at the top of applicableprogramming pages.2. Scan the correct bar code to set the desired programming feature orparameter. You may need to cover unused bar codes on the page, andpossibly the facing page, to ensure that the reader reads only the barcode you intend to scan.3. If additional input parameters are needed, go to Appendix D, Keypad,and scan the appropriate characters from the keypad.Additional information about many features can be found in the “Ref-erences” chapter.If you make a mistake before the last character, scan the CANCEL barcode to abort and not save the entry string. You can then start againat the beginning.Complete the programming sequence by scanning the ENTER/EXIT PRO-GRAMMING bar code to exit Programming Mode.
