Enter/Exit Programming Mode270 PowerScan™ PD9530/PBT9500/PM9500Set Key Sequence IDSets the identifier for keyboard composed strings.$CPWECSet keys sequence IDTo configure this feature, scan the ENTER/EXIT PRO-GRAMMING MODE bar code above, then the bar code atleft followed by 6 digits from Appendix D, Keypad.The ID characters must be represented by their hexadeci-mal ASCII code; if the first 2 digits are 0, this feature is dis-abled. End by scanning the ENTER/EXIT bar code again.Set Key Sequence HeaderSets the header for keyboard composed strings.$CPWE1Set key sequence headerTo configure this feature, scan the ENTER/EXIT PRO-GRAMMING MODE bar code above, then the bar code atleft followed by 32 digits from the Alphanumeric char-acters in Appendix D, Keypad. The digits must bethe hexadecimal ASCII representation of the desiredcharacters.If less than the expected string of 16 characters areselected, scan the ENTER/EXIT bar code to terminatethe string.If the first 2 digits are 0, the feature is disabled. End byscanning the ENTER/EXIT bar code again.Set Key Sequence TerminatorSets the terminator for keyboard composed strings.$CPWE2Set key sequence terminatorTo configure this feature, scan the ENTER/EXIT PRO-GRAMMING MODE bar code above, then the bar code atleft followed by 32 digits from the Alphanumeric char-acters in Appendix D, Keypad. The digits must bethe hexadecimal ASCII representation of the desiredcharacters.If less than the expected string of 16 characters areselected, scan the ENTER/EXIT bar code to terminatethe string.If the first 2 digits are 0, the feature is disabled. End byscanning the ENTER/EXIT bar code again.
