Datalogic SG2 BASE Series Instruction Manual
Also see for SG2 BASE Series: Instruction manualOriginal instructionsInstruction manualInstruction manual
                                                      | |
Contents
| 
SG2 BASE Instruction Manual3610. TECHNICAL DATAThe product technical specifications are given below.ELECTRICAL DATAPower supply (Vdd): 24 Vdc 20%Unit current draw (TX): 2 W maxUnit current draw (RX): 3.5 W max (without load)Outputs: 2 PNPShort-circuit protection: 1.4 A maxOutput current: 0.5 A max / each outputOutput voltage – status ON: Vdd –1 V minOutput voltage – status OFF: 0.2 V maxCapacitive load 2.2 uF @ 24Vdc maxResponse times: See table belowProtected height: 150..1800mmSafety category: Type 2Auxiliary functions: Reset / TestElectrical protection: Class I / Class III (see sect.4.2)Connections: M12-4 poles for emitterM12-5 poles for receiverCables length (for power supply): 50 m. maxOPTICAL DATAEmitting light ( ) : Infrared, LED (950 nm)Resolution: 30 - 50 - 90 mmOperating distance: 0.2…19 mAmbient light rejection: IEC-61496-2MECHANICAL AND ENVIRONMENTAL DATAOperating temperature: -10…+ 55 °CStorage temperature: -25…+ 70 °CHumidity: 15…95 % (no condensation)Mechanical protection: IP 65 (EN 60529)Vibrations: Width 0.35 mm, Frequency 10 … 55 Hz20 sweep per axis, 1octave/min(EN 60068-2-6)Shock resistance: 16 ms (10 G) 1,000 shocks per axis(EN 60068-2-29)Housing material: Painted aluminium (yellow RAL 1003)Front side material: PMMACaps material: PC MAKROLONWeight (single unit): 1.3 kg / linear metre |
Related manuals for Datalogic SG2 BASE Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine