Datalogic Skorpio User Manual
Also see for Skorpio: Quick start guideQuick start guideSpecification sheetUser manualUser manual
                                                                       | |
Contents
| 
USE AND FUNCTIONING 33.7.5 Ethernet SettingsDatalogic Skorpio™ can be connected to an Ethernet network by inserting it into theDatalogic Skorpio™ Ethernet Multi Cradle.NOTEEthernet communication requires Datalogic Skorpio™ SW version5.41 or later. Verify the software version by tapping on Software –Version in the Datalogic default home page. Otherwise, search forthe file version.htm under the Windows folder.When correctly inserted into the Ethernet Multi Cradle, the Ethernet driver installedon the mobile computer will automatically run, and using the DHCP service, willdynamically assign the IP Address.1. From the Datalogic Skorpio™ open Internet Explorer>Internet Options andcheck use LAN no autodial then OK.2. From the Datalogic Skorpio™ > Explorer, enter the IP address in the addressbar (or name), of the PC on the network that you want to communicate with. Youmay be required to enter your network username and password. The LANconnection will take place and you can see the PC shared folders.You can download files from the PC to Datalogic Skorpio™ but not vice versa. To dothis use an FTP connection (see par. 3.8.4).If your network provides Internet Service and does not use a proxy server you candirectly access the Internet. Otherwise set the internet proxy parameters according toyour network settings.31 |
Related manuals for Datalogic Skorpio
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine