Datalogic VS Series Instruction Manual

Datalogic VS Series Instruction Manual Manual pdf 23 page image

INSPECTION PARAMETER CHANGE1777.3 TOOL PARAMETERS CHANGE7.3.1 Tool SelectionPress SET on the “Tools” icon in the “Adjust Current Inspection” panel.The “Tool Selection” panel is displayed and the user can choose the tools to use.All the inspection tools will be displayed one at time according to the creation order.The user can scroll through the different tools using the RIGHT/LEFT ARROWS. Press SETto confirm.All the parameter change panels can be accessed from here on starting from the ROI panelup to the last one with the parameters that can be changed using the selected tool.NOTEAll the inspection parameters can be modified only if previously enabledthrough the DataVS2 GUI panel. For further information, please refer to theDataVS2 Instruction Manual.