Datalogic lynx Instruction Manual

Also see for Lynx D: User manual Instruction manual User manual User manual Quick start guide

Contents

Datalogic lynx Instruction Manual Manual pdf 37 page image

DATALOGIC WEDGE LYNX™21Alphanumeric Keysi'#"ki'#"ki'#"ki'#"kThe reader can be used with terminals or PCs with various keyboard typesand nationalities through a simple keyboard setting procedureThe type of computer or terminal must be selected before activating thekeyboard setting command.Keyboard setting consists of communicating to the reader how to send datacorresponding to the keyboard used in the application. The keys must be setin a specific order.Press and release a key to set it.Some characters may require more than one key pressed simultaneouslyduring normal use (refer to the manual of your PC or terminal for keyboarduse). The exact sequence must be indicated to the reader in this casepressing and releasing the different keys.Example:If one has to press the "Shift" and "4" keys simultaneously on the keyboard totransmit the character "$" to the video, to set the "$", press and release"Shift" then press and release "4".Each pressed and released key must generate an acoustic signal on thereader, otherwise repress the key. Never press more than one key at thesame time, even if this corresponds to the normal use of your keyboard.Press "Backspace" to correct a wrong key entry. In this case the readeremits 2 beeps.Note: "CAPS LOCK" and "NUM LOCK" must be off before starting thekeyboard setting procedure. "SHIFT" must be repressed for eachcharacter and cannot be substituted by "CAPS LOCK".Read the "Alphanumeric Keys" code.Press the keys shown in the following table according to their numericalorder: