Datamars Textile ID R-PO7470 User Manual
                               | |
Contents
| 
3.3.3 Selected hitThe ‘selected hit’ function checks and displays the current ID code read is present in thememory. This function is useful to identify a specific item in a large group of items. When thisfunction is OFF, the reader does not show anything. While it is ON, it shows the message “TAGID FOUND” when the tag read match the selected ID, or the selected tag ID to be found whenthe tag ID does not match.The following figure shows the selected hit function enabled:Thu 07.02.08 14:48:2285%PSKD004811B5ETypeNO TAG SELECTEDNo ID code is selectedfrom the memoryIn this case; the message “NO TAG SELECTED” appears. This means that you have to selectan ID code thanks to the ‘browse memory’ function (refer to chapter 3.2 for details). Therefore,press the ENTER round button to enter the main menu, then press the RIGHT button to enterthe browse menu. Scroll through the ID codes list until you find the needed ID code. Whenhighlighted, press the ENTER button so that it is selected for the ‘selected hit’ function.BROWSE MEMORYThu 07.02.08 14:48:220006 D005267DB70007 D004811B5E0008 D002C2BE510009 D0065BAFF50010 D004811B5EThu 07.02.08 14:48:2285%PSKD004A11F42TypeD005267DB7At this point you are ready to search the selected ID code in a large group of items. When youread an ID code, which matches the selected one, the reader displays the message “TAG IDFOUND!” and beeps three times.Thu 07.02.08 14:48:2285%PSKD005267DB7TypeTAG ID FOUND!R-PO7470 Manual – v. 1.1 – August 2008 9 |
Related manuals for Datamars Textile ID R-PO7470
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine