Extended System-Level Command FunctionsClass Series 2 Programmer’s Manual 115STX KtA Write Application Family Identifier (AFI) to Tag(Direct Mode – HF [13.56 MHz] ISO15693 Tag Interface)This command writes the AFI data to the tag.Syntax: KtAabcca - The number of retry attempts, 0-9.b - Lock the Application Family Identifier (AFI) after writing:0 = No Protection1 = Write ProtectWhere:cc - Two character AFI value representing one byte.Sample: KtA91C3[CR]The sample above writes 0xC3 AFI byte, locking value, retryingnine times if necessary.STX KtD Write Data Storage Format Identifier (DSFID) to Tag(Direct Mode – HF [13.56 MHz] ISO15693 Tag Interface)This command writes the DSFID data to the tag.Syntax: KtDabcca - The number of retry attempts, 0-9.b - Lock the Data Storage Format Identifier (DSFID) afterwriting:0 = No Protection1 = Write ProtectWhere:cc - Two character DFSID value representing one byte.Sample: KtD91C3[CR]The sample above writes 0xC3 DSFID byte, locking value, retryingnine times if necessary.
