OverviewClass Series 2 Programmer’s Manual 5Printer Commands Description NotesA Status commandOptional,bidirectionalcommunicationrequired for thesecommands.U01new data for field 01E0005GReprint with New DataRecordsUsed for fastreprints.xImagenamezA Memory cleanup Typically used fortemporary storage.Commands are available for retrieving stored label formats, updating data, and adding newdata. These techniques are used for increasing throughput; see G, Label RecallCommand “r”, and Label Save Command “s”.Typical commands used in the various stages shown above are listed in the tables thatfollow.Configuration CommandsThe following table lists some commands useful in controlling printer configuration.These commands are generally effective only for the current power-up session; togglingpower restores the default configuration. See Kc for changes to the default power-up configuration. Changing the default power-up configuration and saving objects inprinter Flash memory can reduce the data transmitted for each label and thereforeimprove throughput.ConfigurationCommand Name FunctionA Set Date and Time Sets Date and Time.c Set Continuous Paper Length Must be 0000 for gap media; not usedfor reflective media.e Set Edge Sensor Sets sensing for gap or registration holetype stock.
