Dataprobe 1530041 User Manual
Also see for iBoot-PDU4-C10: Quick start guide
                                                                        | |
Contents
| 
iBoot-PDU_v170515e iBoot-PDU User Manual Page 30Outlet OFF Outlet OFF transitioning to ONOutlet ON Outlet ON transitioning to OFFOnly outlets the user has rights to will be shown.Control Outlets7.3.1.Click on the On, Off or Cycle buttons to control the outlet. The selected action will take place immediately.Outlet Settings7.3.2.Outlet Name Set the name for each outlet. 20 alphanumeric characters, no spacesCycle Set the Cycle time in seconds. This is the length of time the outlet will be offduring reboot, or on when pulsing the power on.Initial Status Sets the state of the outlet when the iBoot-PDU is powered on. Options are On,Off or Last. Last is the last state of the unit before the iBoot-PDU was powereddown.Save Click Save to store the settings.7.4. RemotesThe iBoot-PDU can manage additional iBoot-PDU devices. Add those additional units here.To Add a remote unit7.4.1.Click on the Add Remote Devices button at the top of the page. |
Related manuals for Dataprobe iBoot-PDU4-C10
manualsdatabase
Your AI-powered manual search engine