Dataprobe 1530041 User Manual
Also see for iBoot-PDU4-C10: Quick start guide
                                                                        | |
Contents
| 
iBoot-PDU_v170515e iBoot-PDU User Manual Page 6811. Troubleshooting11.1. Hardware ResetThe hardware reset is located adjacent to the network jack on the rearpanel. Use a non-conductive pin to actuate the reset if necessary.Momentarily depress the reset button to perform a hardware reset.Note that outlets will reset to the status as determined by their Last StateSetting.11.2. Reset Factory DefaultsHolding the hardware reset for more than 5 seconds will reset the device to its factory defaults.Note that this will also reset the IP Address settings to DHCP or 192.168.1.254 if no DHCP server is found. |
Related manuals for Dataprobe iBoot-PDU4-C10
manualsdatabase
Your AI-powered manual search engine