RS20i Installation and Operating Guide Page 47RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00Setup (System) > Inputs > Audio EQ Setup > Edit EQsFigure 28. Copy EQ SettingsUse the Copy EQ function, accessible from the Edit EQs menu to copy the EQ set. Select the CopyEQ From set (select from the pulldown), then in the to EQ field, enter a new name for the EQ set, thenclick the Copy button.2.13 Final AdjustmentsAfter setting the EQ, take another SPL level reading. If the SPL reading has changed, use the Levelcontrol (Third Octave EQ screen) to raise or lower to the proper SPL level for each channel (see Table 9on page 4 43).2.14 Copy InputWhen an input has been configured, you may want to copy it to the next input, as a starting point, to savetime in configuring the next input. For details, see 4 Edit Inputs, page 4 65.
