RS20i Installation and Operating Guide Page 65RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.004.3.2 Startup InputThe Startup input is the default input selection when the RS20i is powered up. Select any defined inputor Last Input. Touch the drop down list to open it, then select the input.Figure 41. Select Startup Input4.3.3 Edit InputsSetup (System) > Inputs > Edit InputsFigure 42. Audio Input Edit Screen Copy Input – Use an existing Input as a template for a new one.Select the audio input you wish to copy from by selecting it from the Copy Input Fromdrop down list. Then, touch the to Input box to bring up the virtual keyboard and enter aname for the new input.Press the Copy button to complete the process, or press Cancel to quit. Copy Preset to Input – Select one of the pre-installed Inputs in your RS20i and use it as atemplate for a new one. Select the input you wish to copy from by selecting it from the
