Datavan G-615 User Manual

Datavan G-615 User Manual Manual pdf 21 page image

PREPARING FOR THE INSTALLATION21Chapter 2Preparing For the InstallationBefore you start installing Touch Terminal, read the following instructions. Glamor Series do not support PCI slot. Do not insert or remove any device or component from the Glamor Series while the power isturned on. If using Glamor Series in a dusty environment, clean the Touch Terminal regularly. Only USB devices are Hot Swap capable. Be sure to turn off the power of the touch terminaland the device before making any connection or disconnection. The spill proof design of Glamor Series conforms to IP65 standard (Front panel only). A bug may be found when installing Windows 2000 from a USB CDROM. When this occurs,please go to the Microsoft website at http://support.microsoft.com/kb/838921DQG¿QGWKHsolution. Always seek the help of authorized service personnel in disassembling the terminal. Themanufacturer will not be held responsible in the event of damage caused by an unauthorizedperson. Before installation or disassembling of the terminal, ensure that the power is turned off.Otherwise, electric shock may occur and may void the warranty. For systems preloaded with WEPOS/POSReady/Windows Embedded on the HDD (O/Spre-installed as an option), the manufacturer provides an optional recovery DVD with thepreloaded operating system delivered with the Touch Terminal. The System Integratorshall take care of software restoration after an OS recovery. A manufacturer-supplied USBinterface COMBO drive will be required for such action. Other brands of COMBO drive mayUHTXLUHDVSHFL¿FGULYHUGLIIHUHQWIURPZKDWLVVXSSRUWHGLQWKHUHFRYHU\'9'Please usethe recovery DVD for rescue operation only. Using it otherwise may wipe out whateveris stored in the HDD. All upgrade device drivers needed for manual installation areavailable in the subfolder “\drivers” in the OS recovered HDD. Then follow the instructionsfrom your system integrator for software recovery. For SoC limitation, the G-615S is required to install at least one DDR3 memory modulebefore booting up the operating system. Be sure to install it in the DDR3 channel 1 socket.