Datavideo DN-600 Quick Start Manual

Also see for DN-600: Instruction manual

Contents

Datavideo DN-600 Quick Start Manual Manual pdf 8 page image

- 8 -Connections & ControlsFront PanelPower LightPower light is for POWER ON/OFF status.LCD DisplayThere are four lines in the LCD Display. The first line is used to display iconsthat reflect some of the current settings of the unit. These settings include: Battery Level ANA / DIG(Video Source is Analog / Digital) /HDV(Unit is set for HDV mode) Loop Play enabled Time RemainingThe second line will display the recording file type set for the selected bin(.MOV e.g.). While playing or recording it also displays the current clip numberand the total number of clips in the bin.The third line will display the bin number (01-99) and a time number(Hr:Min:Sec:Frame). The time number will represent the absolute time addressor the time code of the frame being recorded or played. When selecting a newbin, the time number will be the length of the content in this bin. The fourth lineannotates the significance of the soft keys.Menu Navigation Left / Right soft keyThe functions of the two Soft Keys found below the LCD are dependent uponthe current operation mode. Each function changes with each differentoperation mode. The Soft Key's current functions are displayed on the bottomline of the LCD panel, directly above each respective left / right Soft Key.Menu Navigation Menu keyUse this button to start navigating as well as exiting the various options offeredby DN-600. The functions are called out in the bottom two rows of the LCD.Stepping through options is done by following the directions set in the LCDannotations. At any time, an option can be exited by pressing this key.Note: Main menu selection can be accessed from a Stop or Idle mode.Specialized menu selections are accessed while playing.Fwd / Rew ButtonsIn playback mode these buttons will operate as Fast Forward and RewindButtons. If the Menu Button is pressed these buttons will navigate backwardsand forwards between the various menu options.SD/HDV Source SwitchWhere the recorder is set to operate with one of three signal types, either inDV, NTSC or PAL, or in HDV, all frame rates. Note that changing betweentypes will require ALL contents to be erased. Note that the current type chosenwill be marked with an asterisk.