Datavideo PTR-10 Instruction Manual

Also see for PTR-10T: Instruction manual Instruction manual

Datavideo PTR-10 Instruction Manual Manual pdf 18 page image

18Function DescriptionsNo. Buttons Descriptions1ResetPress RESET button to return the camera lens to the front.2SetPresetSaving PAN/TILT PresetsThe PTR-10 is equipped with 50 PAN/TILT presets. To save PAN/TILTsettings to presets, you should first move the camera to a desiredPAN/TILT position then press the number keys to select a presetnumber (1-50). Finally press the SET button to store the PAN/TILTsettings (Note: You can also issue the save command using the RS-422 protocol).Recalling PAN/TILT PresetsFirst press the number keys to select a preset number (1-50) thenpress the PRESET button to recall the PAN/TILT settings.2GroupEnabling the GROUP motion activates automatic cameramovements. Each group consists of up to 16 PAN/TILT presetsallowing automatic movement of cameras to these positions in theorder configured in the group.Recalling GroupThe PTR-10 is equipped with 8 groups. To recall a group, first pressthe number keys to select a group number (1-8) then press theGROUP button to enable it.Saving Group SettingsTo configure the group setting, first open the OSD menu, thenselect MEMORY.Each group allows you to select up to 16 presets from the PRESETNO. option for automatic movements of the camera mounted. Youcan set the stop time for each preset. Furthermore, in the NEXTPOSITION option, set RETURN to repeat the group motion and therest for single group motion.Group CancelPress Enter or Reset button to terminate GROUP motion.3 Camera SelectSelect CAM1-CAM4 in a multi-camera environmentAssign an ID number to the camera intended for operation byadjusting the IRID (SW2) switch located at the rear of the cameraPress CAMERA SELECT (CAM 1~ CAM4) buttons corresponding tothe numbers set previously to navigate between four cameras