Datavideo PTR-10 Instruction Manual

Also see for PTR-10T: Instruction manual Instruction manual

Datavideo PTR-10 Instruction Manual Manual pdf 28 page image

28DIP SwitchThe DIP Switch can be found on one of the system panels and allows the user to set the device’sVISCA ID, enable remote control (DVIP or RS-422), select the output video resolution, and configurehow the video mode can be selected. See the table below for various settings.DIP SW 1/2/3 VISCA ID(1,2,3) = (ON,OFF,OFF) VISCA-ID 1(1,2,3) = (OFF,ON ,OFF) VISCA-ID 2(1,2,3) = (ON ,ON ,OFF) VISCA-ID 3(1,2,3) = (OFF,OFF,ON) VISCA-ID 4(1,2,3) = (ON ,OFF,ON) VISCA-ID 5(1,2,3) = (OFF,ON ,ON) VISCA-ID 6(1,2,3) = (ON ,ON ,ON) VISCA-ID 7DIP SW 4 Remote Control ProtocolON DVIPOFF RS-422DIP SW 5/6/7 Resolution(5,6,7) = (OFF,OFF,OFF) 1920 x 1080i 59.94(5,6,7) = (ON,OFF,OFF) 1920 x 1080i 50(5,6,7) = (OFF,ON,OFF) 1280 x 720p 59.94(5,6,7) = (ON,ON,OFF) 1280 x 720p 50(5,6,7) = (OFF,OFF,ON) 1920 x 1080p 59.94(5,6,7) = (ON,OFF,ON) 1920 x 1080p 50(5,6,7) = (OFF,ON,ON) 3840 x 2160p 29.97(5,6,7) = (ON,ON,ON) 3840 x 2160p 25DIP SW 8 Video Mode Selection MethodON Video mode selectable by DIP switch onlyOFF Video mode selectable by OSD menu