DIGITAL VIDEO SWITCHER24This first tab can be used to choose the method ofconnection between the computer and the switcher. In thiscase the SE-2800 is connected using selected Ethernet IPaddresses.Note that the first three numbers in the IP addresses of theswitcher and computer should be the same. The last numberin each IP address should be unique.If you are connecting for the first time you may be askedby the computer to change the firewall setting to allow thisapplication to connect to the switcher.The settings tab is another way to change the menusettings of the switcher. The options may appear in aslightly different order to those in the onscreen menudescribed on page 17.Each menu option can be expanded by clicking on theplus sign in the left hand pane. The right hand paneshows any values which can be changed.The Input settings tab allows each input to beconfigured from the computer.Note due to the design of the switcher different inputsmay have more or less options as they are not all thesame. See page 9, Video Input Module.Each menu option can be expanded by clicking on theplus sign in the left hand pane. The right hand paneshows any values which can be changed.It is possible to store the current profile or settings of the switcher to your computer. This file can thenbe restored to the machine at a later date allowing simple configuration of the unit. Depending on theincluded levels of the profile this save process may take some time to complete.Switcher tabSettings tabInput settings tabProfiles