Datavideo SE-2850 Instruction Manual

Also see for SE-2850: Instruction manual

Datavideo SE-2850 Instruction Manual Manual pdf 24 page image

24Factory SettingsFactory Settings Tick selection for ON or OFF Resets to factory defaultClock SettingsHorizontal Position (Left toRight) 000-110Vertical Position (Lower toUpper) 000-124SET Hours 0-23SET Minutes 0-59Clear Seconds Tick selection for clearing secondMulti Screen ModeThis option relates to the HDMI outputs 1 and 2.A: M1=PVW+PGM+3 IN; M2=9 INB: M1=PVW+PGM+12 IN; M2=PGMC: M1=PVW+PGM+8 IN; M2=PGMD: M1=PVW+PGM+12 IN; M2=M1E: M1=PVW+PGM+8 IN; M2=M1GPI SettingsInput Select 00-12 Chosen input numberTime Delay In frames between 1 to 75ModeLevel Mode Tick selection for ON orOFFPulse Mode Tick selection for ON orOFFCountdown Timer SettingsInput 1-12Count Down Enable Each input can be selectedfor Count Down ON or OFF.Down Counter ValueIf Count Down is ON thenthe Down Counter value isset in minutes and seconds(MM:SS) - Max.= 1 Hour or60:00, Default = 15 Secondsor 00:15Multi-Screen Audio SourcePreview Tick selection of Program or Preview audio on the HDMIoutputsProgramControl InterfaceEthernet Tick selection for ON or OFFRS4222.3.8 PC Control – SE Remote SoftwareIt is possible to control the SE-2850 with a Windows 7 computer using an Ethernet connection.The SE Remote software supplied with the switcher needs to be installed on the computerfirst. The SE-2850 then needs to be placed into PC Control mode. To do this press the PCControl button on the SE-2850 Control Panel. Once launched, the Remote software displaysan image of the SE-2850’s keyboard as shown below. Any active functions or selections will