Datavideo SE-2850 Instruction Manual

Also see for SE-2850: Instruction manual

Datavideo SE-2850 Instruction Manual Manual pdf 25 page image

25be shown with a red button or key. These buttons or keys can be clicked with a mouse oralternatively you could use a touch screen monitor.Before launching the SE Remote software, please see Chapter 3 Switcher ConfigurationUtility for network setup information.NOTE: It is not possible to run both the SEConfig and SE Remote software applications at thesame time.SET FunctionAfter the network connection between the PC and the SE-2850 is successfully configured, youcan then launch the SE Remote software on the PC. Locate SET function button which islocated just above the T-Bar. When clicked a new window will open as shown below. ThisSettings window is used to match the software to the IP address of the connected SE-2850switcher.Enter the switcher’s IP address and then click the “Check” button to determine the switchermodel number by selecting it from the “Model” pull-down menu. Once configured, click the