Dave Smith Instruments Pro 2 Operation Manual

Contents

Dave Smith Instruments Pro 2 Operation Manual Manual pdf 55 page image

45Pro 2 Operation ManualModulationEdit Mod #: (Soft knob 1 in the display) Selects a modulation slot.Source: (Soft knob 2 in the display) Selects a modulation source.Amount: (Soft knob 3 in the display) Sets the amount of modulation fromthe source to the destination. Amount can be set over a range of -127 to 127.Destination: (Soft knob 4 in the display) Selects the modulation destination.Sort Slot: (Soft key 1 in the display) Sorts all mod slots in numerical order.Sort Source: (Soft key 2 in the display) Sorts all mod sources by simi-lar type. This makes it easier to see when the same source is routed tomultiple destinations.Sort Destination: (Soft key 3 in the display) Sorts all mod destinationsby similar type. This makes is easier to see when the same destination isreceiving modulation from multiple sources.Using the Assign Mod ButtonsThe Pro 2 provides a shortcut for modulation routing using the AssignMod Source and Assign Mod Destination buttons.To quickly assign modulation:1. Press and hold the aSSign mod Source button. Choose a source by turn-ing its knob or pressing its button, or by using a controller (pitch wheel,mod wheel, or touch slider).The mod matrix appears in the display andthe source is assigned to the first available mod slot. Release the aSSignmod Source button when done.2. Press and hold the aSSign mod deStination button. Choose a destinationby turning its knob or pressing its button. That destination is assigned to themod slot. Release the aSSign mod deStination button when done.3. Use either the amount knob or soft knob 3 to set the modulationamount.To quickly choose a Character effect as a mode destination, hold down theassign mod destination button then tap the character button repeatedly to cycle throughthe various character parameters.