60 EffectsDave Smith InstrumentsEffects Parameters (Front Panel)Effect 1: Turns effect 1 on or off. On stacked or split sounds, enable theedit layer b button to adjust effects for Layer B.Effect 2: Turns effect 2 on or off. On stacked or split sounds, enable theedit layer b button to adjust effects for Layer B.Effect Type: Selects the effect type.Select 1/2: Toggles between effect 1 and effect 2 for editing.Mix: 0...127—Sets the balance between the processed (wet) signaland unprocessed (dry) signal. Full left is completely dry. Full right iscompletely wet.Sync: On, Off—When a delay effect is chosen, this enables syncing of thetimed delay repeats (feedback) to the arpeggiator, sequencer, or MIDI clock.When clk sync is on, delay time (parameter 1) has the following values:Value Delay TimeWhole 4 beatsHalf dot 3 beatsHalf 2 beatsQuarter dot 1 1/2 beatsQuarter 1 beatQuarter triplet 1 1/3 beats8th dot 3/4 of 1 beat8th 1/2 of 1 beat8th triplet 1/3 of 1 beat16th dot 3/8 of 1 beat16th 1/4 of 1 beatMaximum delay time is 1 second. The combination of longer synced delaytimes with slower tempos can result in delay times that would be greater than 1second. When that happens, the delay time is divided by 2 until it no longer exceedsthe 1 second limit. For example, if the BPM is set to 60 and Delay Time (Parameter 1)is set to Half, the expected delay time would be 2 seconds. The actual delay time willbe 1 second (i.e. 2 seconds divided by 2).
