63Prophet X User’s GuideArpeggiatorTo use the arpeggiator:1. Press the arpeggiator on /off switch to turn it on.2. Hold down one or more notes on the keyboard. The arpeggiator playsthem according to the settings you’ve chosen.3. To latch arpeggiation on (so that you don’t have to continuously holddown notes) press the hold button.4. In the display menu, adjust settings such as mode , octave range,repeats, and bpm .5. To synchronize a delay effect to the arpeggiator, turn on sync in the effectssection, choose a delay, and adjust its delay time setting as desired.An audio signal connected to the rear-panel sequence jack can be used to controlarpeggiator (and sequencer) playback. This makes it possible to tempo sync the arpeg-giator to a recorded drum track or other audio source. Audio signals used to drive thearpeggiator/sequencer should not exceed 5 volts peak-to-peak. See “22. Seq PedalMode: Normal, Trigger, Gate, T-G—Selects the mode for the rear-panel sequencerjack.” on page 127 for more information about choosing the appropriate mode forthese behaviors.Arpgeggiator Parameters (Front Panel)On/Off—This button turns the arpeggiator on and off.Play Mode: Sets the order in which notes play when the arpeggiator is on. Seethe table.Arp Mode BehaviorUp Plays from lowest to highest noteDown Plays from highest to lowest noteUp + Down Plays from lowest to highest and back to lowestRandom Plays notes in random orderAssign Plays notes in the order the keys were pressed
