Setup Mode14The Cooling and Heating Degree Day Bases are used to determine the CoolingDegree Day Daily Total and Heating Degree Day Daily Total, which display aspart of the Weather Center when the outside temperature variable is selected.See “Inside and Outside Temperature” on page 18 for more information.A base setting for both the Cooling and Heating Degree Day temperature is notset at the factory, allowing you to choose. A base of 65°F (15°C in Europe) issuitable for most applications.To set your cooling degree day base:1. Press 2ND and SET. The value of65° appears. Use the < and > keysto select a segment of the value.2. Press the + and - keys to adjust thevalue of the selected segment.3. Press 2ND and UNITS to changethe temperature setting between Fahrenheit and Celsius.4. Press DONE to move to the next screen.The Heating Degree Day Base displays:To set your heating degree daybase, follow steps 1 through 4above.To turn the degree day function off,press 2ND and then clear. The valuechanges to dashes.Note: If a base temperature is displayed, degree day data is being accumulated. If the valueshows dashes, the degree day function is off and will not appear in the Weather Center.Screens 17 and 18: Commentary and Key BeepCommentary refers to the extra information and comments on current weatherconditions, such as lunar and solar eclipses, meteor showers and otherinformation, that displays on the console in the Weather Center.Key Beep is a sound that indicates a key has been pressed. (It is different fromthe “error” sound. To change this sound, See “Changing Alarm Sound” onpage 33.)These functions can be turned off or on.1. Press the + and - keys to togglethe setting to OFF or ON.2. Adjust key beep volume usingthe < and > keys.3. Press DONE to move to the nextscreen.Screen 19: Baud Rate (Optional)The Baud Rate screen displays only if a WeatherLink data logger is installed inthe console. The console uses a serial, USB, or Ethernet port to communicatewith a computer. If you are connecting the console directly to your computervia USB or Ethernet connection, leave the setting at 19200, the highest rate forthe port.FF