Displaying Weather Variables25Evapotranspiration (ET) (Optional)All the evapotranspirationvalues share the same sectionon the console as rain values,below the barometricpressure variable, on the rightside.Note: Evapotranspiration, solar radiation and UV index measurements are available only whenthe Vantage Vue console is listening to a Vantage Pro2 Plus ISS or other Vantage Pro2ISS in which a solar radiation (and a UV sensor, for UV index) has been installed and“VP2 ISS” has been selected in Screen 6 of the Setup Mode. See “Screen 6: ConfiguringTransmitter IDs” on page 9.1. Press and release 2ND then press ET to display the dailyevapotranspiration reading.Note: If you hear an error beep when selecting ET, it means the station the console is selectedto “hear” is not a Vantage Pro2 station with a solar radiation sensor.2. Press and release 2ND then press ET again to display the monthlyevapotranspiration reading.3. Press and release 2ND then press ET a third time to display theevapotranspiration reading since January 1st of the current year.4. Press WxCEN to display the weather information available for all of the ETvariables in the Weather Center.5. Press WxCEN multiple times to scroll through the ET-related WeatherCenter screens, which include:• ET Last __ Days — Displays the total ET amount over a user-selectednumber of days. To change the number of days over which the total ETamount is displayed, press the + and - keys when this screen is displayedin the Weather Center. The number of days allowable is 26 (the last 25days plus the current day).• Solar Radiation — Displays the current solar radiation measurement forthe day.• UV Index — Displays the current UV index.Weather CenterPress WxCEN to view added information in the WeatherCenter section of the console for each variable. See eachindividual variable for a list of Weather Center screens availablefor each variable.inET DAYSSESWMPHWINDHEATFDaily Evapotranspiration with Solar Radiationinformation displayed in the Weather CenterETRAIN2NDW X C EN