Genesis MPChapter 3 – Connecting Additional Peripherals u 47If you are installing drives of both sizes, the table to the left shows the maximumnumber of each size drive that may be installed into a Genesis MP.Installing multiple hard drivesAdding SCSI devices into the Internal 3.5" bay1. Open Genesis MP (loosen the side door panel) by following the easy instructionslisted previously in this chapter. Remember to turn everything off.2. Put on your anti-static wrist strap.3. Locate a pair of the small black SCSI rails and the four flat Phillips head screwsthat came with Genesis MP.3.5" Drive Rails & Screws4. Install the rails onto each side of the 3.5" SCSI device so that the thumb end of therails are on the side of the SCSI device which has the power and SCSI connectors.Installing Drive Rails1" Tall 1.6" TallDrives Drives(1/3 height) (1/2 height)7 05 13 21 31.6” high drives1” high drivesSCSI power connectorSCSI connectorThumb end of drive rail
