Dazzle DCS 200 User Manual
Also see for Creation Station 200: Quick start guide
                                        | |
Contents
| 
Dazzle DVD Creation Station 200 User’s Guide • Using the Digital Media Card Reader • Page 24Inserting a SmartMedia CardBefore you insert a SmartMedia card, be sure to place the DCS 200 in it’s stand with theDazzle logo on the right-hand side. To insert a SmartMedia Card, follow these steps:1. Position the SmartMedia card in the direction shown in the illustration below.Note: The DCS 200 accepts only 3.3V SmartMedia cards. It does not support 5VSmartMedia cards.2. Insert the card in the lower media slot with the gold contacts on the right-hand side.The card’s notch must be located in the lower corner.Notice the notched corner of the SmartMedia card. The notch appears on theright-hand side when you are looking directly at the gold contacts on the top of a 3.3VSmartMedia card (see the illustration below).Caution: Be careful not to insert the SmartMedia card in the wrong direction. Be sureto insert the SmartMedia card with the gold contacts on the right-hand side. If it isforced in, the card reader or the SmartMedia card may be damaged, or data on thecard may be lost or corrupted. If the computer does not recognize the media, or if itdoes not fit correctly, re-position the card and try reinserting it.3. Gently push the card in all the way until it locks in place.Note: Do not insert a SmartMedia card in the DCS 200 card reader while capturingvideo.Insert the SmartMediacard into the lower slotwith the gold contactsinserted first and facing tothe right.SmartMedia Card Comparison (view of cards from top)5V SmartMedia card(not compatible)3.3V SmartMedia card(compatible)Left notchindicates 5V cardRight notchindicates 3.3V cardGold contacts Gold contactsWrite protectareaWrite protectarea |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine