DeLonghi 5500 Important Instructions Manual

Also see for Coffe Center 5500: Instruction manual Instructions

Contents

Descaling1. Press the P button to enter the menu;2. Turn the selection knob until "Descaling" isdisplayed;3. Press the button;4. The message "Confirm?" is displayed.5. Press the button to confirm (or thebutton to cancel the operation);6. Carry out descaling as described in the sec-tion "Descaling" on page 19.Setting the temperature1. Press the P button to enter the menu;2. Turn the selection knob until "SetTemperature" is displayed;3. Press the button;4. Turn the selection knob until the required tem-perature (high, medium, low) is displayed;5. Press the button to confirm (or thebutton to cancel the operation);6. Press the button to exit the menu.Auto-Off1. Press the P button to enter the menu;2. Turn the selection knob until "Auto-Off" is dis-played;3. Press the button;4. Turn the selection knob until the requirednumber of hours of operation (1, 2 or 3) isdisplayed;5. Press the button to confirm (or thebutton to cancel the operation);6. Press the button to exit the menu.Setting water hardness1. Press the P button to enter the menu;2. Turn the selection knob until "Water Hardness"is displayed;3. Press the button;4. Turn the selection knob until the water hard-ness measured using the indicator strip is dis-played (see paragraph "Measuring water hard-ness" - page 19);5. Press the button to confirm (or thebutton to cancel the operation);6. Press the button to exit the menu.Resetting factory default values(reset)This function resets the entire menu with thedefault values (except the language, whichremains as set).1. Press the P button to enter the menu;2. Turn the selection knob until "Default Values"is displayed;3. Press the button;4. The message "Confirm?" is displayed.5. Press the button to confirm and exit(or the button to cancel the opera-tion);Installing the filterCertain models are provided with a watersoftener filter (alternatively it can be pur-chased separately from an authorizedCustomer Service Center).To install the filter, proceed as follows:1. Insert the filter in the water tank asfar as it will go (see figurealongside).When you install the filter, youmust notify the appliance of itspresence.2. Press the P button to enterthe menu;3. Turn the selection knob until "Install Filter" isdisplayed;4. Press the button;5. The message "Confirm?" is displayed.6. Press the button to confirm (an aster-isk appears at the top right of the display);7. Press the button to exit the menu.Replacing the filter ("Reset waterfilter")When the red light comes on, the filter mustbe replaced:1. Extract the exhausted filter and replace with anew one;2. Press the P button to enter the menu;3. Turn the selection knob until "Reset WaterFilter" is displayed;4. Press the button;5. The message "Confirm?" is now displayed.6. Press the button to confirm (or thebutton to cancel the operation);7. Press the button to exit the menu.12