12C H A P T E R 3 - C L E A N I N G A N D M A I N T E N A N C Efig. 11fig. 12ACfig. 13fig. 15fig. 14X Y3.1 - CARE AND CLEANINGAlways unplug the oven-broiler and allow it to coolbefore cleaning. This unit has been designed andengineered with your safety in mind. To assure maximumsafe operation, keep unit clean free of grease and build upof food particles.The internal cavity of your oven is covered with a specialenamel to which splashes and food particles do not stick,thus making cleaning particularly simple. Do not cleaninterior with metal scouring pads.Pieces can break off and touch electrical parts, creatingrisk of electrical shock.To clean the glass door, use a glass cleaner or a dampcloth. Wripe dry with a clean cloth. To clean the exteriorfinish, use a damp, sudsy cloth. For stubborn stains, a non-abrasive liquid cleaner or spray glass cleaner may beused. Do not use metal scouring pads, as they might marthe finish. Always remove cleaning agents by polishingwith a dry cloth.Slide the crumb tray (G) out from under the bottom of youroven (see fig. 11). Wash by hand. Should the soilage bedifficult to remove, rinse the crumb tray with hot soapywater and if necessary, scour it delicately, withoutscratching it.To make the cleaning of the inside of the oven easier, theupper heating element (A) can be lowered by pulling theclasp for drop down heating element (C) (fig. 12-13).IMPORTANT: after cleaning, reposition and reattach theelectrical element (fig. 14). The oven must be not usedwith the element in the lowered positioned.OVEN LIGHTThe oven light (B) is always on when the oven is on. Toreplace the bulb, proceed as follows:• unplug the appliance from the power socket• unscrew the protective glass cover (X), by turning itanti-clockwise, and replace the bulb (Y) with a new oneof the same type (see Fig. 15). Replace the protectiveglass cover (X).Only use bulbs suitable for ovens (T572°F)N.B. The oven can still be used even if the bulb is burnt-outAS 1070 GB 30-10-2003 11:10 Pagina 12