ToasterThe “Defrost Light” will remain on while the defrost function is inuse, and the toasting time will be automatically extended toachieve the desired toasting level.Using the Stop/Cancel ButtonThe toasting can be interupted at any time by simply pressing thestop/clear button.Warning: do not force the control lever to eject toast etc.Always use the stop/cancel button.Using the Reheat Button:• Press down control lever and press the reheat button.• The reheat light will remain on whilst the reheat function is in use.Please note that this is a fixed reheat time which cannot beadjusted by the browning control.Crumb trayThe crumb tray should be emptied regularly as a build-up of crumbscould be a potential fire hazard. After toasting, allow the toaster to cooldown thoroughly, then slide out the crumb tray and empty.Note:The toasting slots allow you to use a variety of differentbread widths, as well as muffins, tea cakes, crumpets and bagels etc.However, you should not force items into the slots which areclearly too large. If an item does become jammed, switch thetoaster off at the mains immediately. Once cooled, turn the toast-er upside down and gently shake to remove the lodged item. Donot insert sharp objects such as knives, as this may damage theheating element.Hints and Tips for better toasting result:The first time you use the toaster, you should do so without bread. Thiswill pre-heat the new element and burn off any dust collected duringthe storage process.If your toaster is not plugged in and switched on, the control lever willnot lock in the down position.For best results use bread slices of even thickness, size and freshness.Select a lower setting ifa) using stale bread (toasts more quickly than fresh bread).b) using thin bread (toasts more quickly than thick bread).To remove smaller items such as muffins, crumpets and bagels thecontrol lever can be lifted approximately 20mm above the startingposition.To achieve even browning, we suggest a minimum of 30 secondsbetween each toasting to allow the control to automatically reset.4