DeLonghi Coffee maker Manual 

Also see for Coffee machine: Manual Manual Owner's instructions Owner's manual Important instructions

Contents

DeLonghi Coffee maker Manual  Manual pdf 3 page image

243 INSTALLATION• After removing the packaging, make sure the product is complete and undamaged. If in doubt, do notuse the appliance and contact a qualified professional.• Packing elements (plastic bags, polystyrene etc) must not be left within reach of children as they mayrepresent a hazard.• Place the appliance on a work surface far away from water taps, basins and sources of heat.• After positioning the appliance on the work top, leave a space of at least 5 cm between the surfaces ofthe appliance and the side and rear walls and at least 20 cm above the coffee maker.• Never install the appliance in environments where the temperature may reach 0°C or lower (the applian-ce may be damaged if the water freezes).• Make sure the mains voltage corresponds to the voltage indicated on the appliance rating plate.Connect the appliance to an efficiently earthed socket with a minimum current rating of 10A only. Themanufacturer may not be considered liable for possible incidents caused by the failure to adequatelyearth the mains.• If the power socket does not match the plug on the appliance, have the socket replaced with a suitabletype by a qualified professional.• The power cable on this appliance must not be replaced by the user as this operation requires the use ofspecial tools. If the cable is damaged or requires replacing, contact an authorised service centre only toavoid all risks.• You should personalise water hardness as soon as possible following the instructions in paragraph 12.6.To learn how to operate the appliance correctly, when you use it for the first time, follow the step-by-stepinstructions given in the following paragraphs.4 USING FOR THE FIRST TIME1. The first time you use the appliance, select the language.To set English, plug the appliance into the mains socket and wait for the appliance to display:PRESS OK TO INSTALL ENGLISHPress the button for at least 3 seconds until the appliance displays:ENGLISH I NSTALLEDThe appliance then displays the setting message in English.2. After a few seconds, the appliance displays:FILL TANKTo fill, remove the tank (fig. 1), rinse and fill with fresh water. Never exceed the MAX line.(When removing the tank, the cappuccino maker must always be positioned towards the centre of theappliance, otherwise the tank cannot be removed).Put the tank back and push as far as it will go.3. The appliance now displays:TURN the STEAM KNOB02_GB-5732131000 4-10-2004 15:32 Pagina 24