GB23adding rinse aidRinse aid helps to ensure water does not cling and leave marks on crockery during the drying phaseand helps crockery dry faster after it has been washed. Only pour rinse aid that is for domesticdishwashers into the reservoir. This model is designed to use liquid rinse aids only.Please follow the steps below to pour the rinse aid into the storage reservoir, and the amount willdispense automatically.1. Turn the cap and open as indicated.2. When the cap open marking is aligned, youmay lift the cap up.3. Pour the rinse aid in until the level indicatorturns completely black in colour and closethe cap.4. Be careful not to overfill the reservoir. Wipeup any spills.adjusting the rinse aid reservoirThe rinse aid reservoir has six settings. Both the recommendedsetting and the factory setting is “4”. If the dishes are not dryingproperly or are spotted, adjust the dial to the next higher numberuntil your dishes are spot-free.• If the water hardness in your area is soft, you may not need rinse aid as it may causewhite film to develop on your dishes.• If you decide to use a detergent tablet, you do not need to add rinse aid into the rinseaid reservoir.• Rinse aid refill indicator will illuminate when the reservoir is running out of rinse aidand requires refilling.• Alternatively, you can judge the amount of rinse aid by checking the rinse aid indicatornext to the reservoir cap. When the indicator is black, it means it is full. When it isclear, it means it is almost empty.• If there is some rinse aid residue left in the washingcompartment or your dishes, turn the rinse aiddispenser dial to 1.Rinse Aid Indicator