DeLonghi DDWTT17 Installation Instructions Manual

DeLonghi DDWTT17 Installation Instructions Manual Manual pdf 33 page image

GB33spray armsParticles of food can get stuck in the spray arm jets andbearings. The spray arms should therefore be checkedand cleaned regularly.Ensure the dishwasher is switched off. Use a pointedobject, e.g. a cocktail stick, to loosen food particles in thespray arms’ jets.frost precautionAvoid placing the dishwasher in a location where the temperature can get below 0°C. If yourappliance is left in an unheated place over the winter, you are advised to:1. Disconnect the unit from the water inlet.2. Turn on the unit. Select any washing cycle and let it run for 1 minute only. This drains out all theexcessive water that remains in the unit.3. Disconnect from the mains socket.4. Empty the dishwasher.5. Close the dishwasher door.6. Disconnect the unit from the water drain. Use a suitable receptacle to catch any residual water inthe pipes.Should you encounter any difficulties with the above steps, please ask a service technician forassistance.moving the dishwasherIf you have to move the unit, for instance due to moving house, you are advised to:1. Disconnect the dishwasher from the mains.2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch anyresidual water in the pipes.3. Remove the dishwasher from the current location with the hoses discharged.4. Pull the unit out together with the hoses.• Avoid over tilting the unit during transportation.• We recommend that 2 people handle the dishwasher during installation.Do not attempt to remove the spray arms.