DeLonghi DEFL605E Installation And Servicing Instrucnions

Contents

41AFTER CLEANING, REPLACE THEINNER GLASS PANEWhen replacing the inner glass pane, makesure that:• You replace the pane correctly, asshown. The pane must be in theposition described below in order tofit into the door and to ensure that theoven operates safely and correctly.• You take extra care not to bump theedges of the glass against any objector surface.• You do not force the pane into place.If you are experiencing difficultiesreplacing the pane, remove it and startthe process again from the beginning.If this still does not help, call CustomerCare.To reassemble the inner pane of the ovendoor operate as follows:1. Make sure the door is locked open(see fig. 40).2. Replace the inner pane:• Check that the four rubber pads are inplace (“D” in fig. 43).IMPORTANT: It is advisable, whilerefitting the glass, to keep pressed inposition the four rubber pads “D”, by afinger, to avoid breakage or slippage ofthe rubber pads themselves (fig. 44).• Check that you are holding the panethe correct way. You should be able toread the wording on it as it faces you.• Insert the pane in the left “E” and right“F” slide guides (fig. 44), and gentlyslide it to the retainers “H” (fig. 45).• Gently push the glass retainer backinto place. You should be able tohear the tabs on both sides click asthey lock the glass retainer in (fig.46). Please take special care toreassemble it correctly: if correctlyfitted, the descending section shall betowards the inside of oven.3. Unlock the oven door by opening itcompletely and closing the lever “A”on the left and right hinges (fig. 47).HDFEClickClickAFigure 43Figure 44Figure 45Figure 46Figure 47

/ 44

Related manuals for DeLonghi DEFL605E