42PROBLEM CAUSE SOLUTIONThe espresso coffee drips from theedges of the filter holder rather thanthe holesThe filter holder is inserted incorrectly Attach the filter holder correctly and rotatefirmly as far as it will goThe espresso boiler gasket has lost elas-ticity or is dirtyHave the espresso boiler gasket replaced byCustomer ServicesThe filter is clogged, or the perforatedfilter is missing or dirtyClean as described in section "13.4 Coffeefilter cleaning and maintenance"The coffee froth is too light (deliveredfrom the spout too fast)The appliance settings need reviewing See section "16. How to make perfect coffee"The coffee froth is too dark (deliveredfrom the spout too slowly)The appliance settings need reviewing See section "16. How to make perfect coffee"No milk froth is formed when makingcappuccinoThe ring (A7) is in the "FLAT" (NOFROTH) positionPush the ring into the "FOAM" positionMilk not cold enough Always use semi-skimmed milk at refrigera-tor temperature.The cappuccino maker (A8) is dirty Clean the cappuccino maker as described insection "10. Cleaning the cappuccino makerafter use"Scale in the water circuit Descale as described in section "14.Descaling"At the end of descaling, the appliancerequests a further rinseDuring the rinse cycle, the water tankhas not been filled to the MAX levelRepeat the rinse cycle from point (8) of section"14. Descaling"The appliance does not grind the coffee There is foreign matter that cannot beground in the coffee millClean the burrs as described in section "13.8Cleaning the burrs", making sure you removeall the beans from the beans container (A2)before extracting it.Before putting the burr back, vacuum all resi-dues from the housing (fig. 44).…→