Electronic programmer (Main oven only)AUTOTIMERThe electronic programmer is a device which groups together the following functions:– 24 hours clock with illuminated display– Timer (up to 23 hours and 59 minutes)– Program for automatic oven cooking– Program for semi-automatic oven cooking.DESCRIPTION OF THE BUTTONS:TimerCooking periodEnd of cooking timeManual position and cancellation of programmed cookingTo increase the numbers on the digital display.To decrease the numbers on the digital display.DESCRIPTION OF THE ILLUMINATED SYMBOLS:AUTO - flashing - Programmer in automatic position but not programmedAUTO - always illuminated - Programmer in automatic position with program inserted.Automatic cooking taking placeTimer in operationand AUTO - flashing - Program error.(The time of day lies between the calculated cooking start and end time).NOTE: Select a function using the respective button and, in 5 seconds, set the requiredtime with the / buttons (“one-hand” operation).After a power cut the display resets to zero and cancels the set programs.ELECTRONIC CLOCKThe programmer is equipped with an electronic clock with illuminated numbers whichindicates hours and minutes.Upon immediate connection of the oven or after a power-cut, three zeros will flash onthe programmer display.To set the correct time of day it is necessary to push the button and then the orbutton until you have set the correct time.In another way push simultaneously the two buttons and at the same time pushthe or button.NOTE: If the clock is reset it deletes any previously set programs.AUTOFig. 913