DeLonghi FX160ECO Instruction Manual

Also see for Pinguino FX160ECO: Use and maintenance manual

Contents

11VENTILATION/PURIFICATIONThis is ideal for dusty or polluted areas; in effect, the appliancerecycles and purifies the air using the dust filters and 3M Filtrete™electrostatic filters fitted. Adjust the fan speed by pressing the“FAN” (Q) button, as illustrated in the air conditioning function.Bear in mind that the higher the speed, the greater the volumeof air filtered; by selecting the “Silent” speed, less air is filtered, butthe noise level is low.“AUTO” function cannot be selected in this mode.The display will show the fan speed selected.PROGRAMMING THE TIMERThe timer programs the appliance to switch on and switch off.This will save electrical energy by optimizing the operating times.The timer is set using the buttons + (F) or – (G); these increase anddecrease by one hour at a time, but if pressed for more than 2seconds will automatically change the time more quickly, up toa maximum of 24 hours.How to set the delayed start function• Connect the appliance to the mains supply and pressON/OFF button: next, select the required operating mode(temperature, fan speed etc.)• Press the ON/OFF button again: the appliance will go intostand-by mode.• Press the timer button (1): on the display the two central seg-ments will start to flash.• Set the number of hours after which the appliance shouldswitch on, by pressing the + or – buttons.The indicator (L) on the display will continue to flash until theappliance starts operating.The appliance can be programmed for up to 24 hours in advan-ce.How to set the delayed stop function• The appliance can be programmed for delayed stop fromany of the operating modes (air-conditioning/dehumi-difying/purification/ventilation.• Press the Programmer button (1): on the display the two cen-tral segments will start to flash.• Set the number of hours after which the appliance shouldswitch off by pressing the + or – buttons.The indicator (L) on the display will continue to flash until theappliance switches itself off. It will then go into Stand-by mode.“Silent”speed“Min”speed“Max”speed25O p e r a t i o nGB 19-06-2003 9:09 Pagina 11