DeLonghi FX160ECO Instruction Manual

Also see for Pinguino FX160ECO: Use and maintenance manual

Contents

12O p e r a t i o nSELF-DIAGNOSISThe appliance is equipped with a self-diagnosis system which identifies any operating problems.IF THE DISPLAY SHOWS… ….WHAT SHOULD YOU DO?HH PP HIGH PRESSURE Insert and re-insert the plug. If the problem persists, call the servicecentre.LOW TEMPERATURE If the machine is operating as an air-conditioner or dehumidifier, thiswill prevent the formation of ice. The appliance will start up auto-matically once the defrosting process has ended.FF FF FAN FAILUREPP FF PROBE FAILUREIf either of these messages appears, call the service centre.FULL TANK Empty the tank at the rear of the appliance and reposition correc-tly.THIS UNIT EMPLOYS AN EXCLUSIVE CON-DENSATION RECYCLING SYSTEM TO DISPO-SE OF EXCESS MOISTURE. IN NORMALCONDITIONS, CONDENSATION IS DISPO-SED OF AUTOMATICALLY. WHEN THE HUMI-DITY IS PARTICULARLY HIGH, AN EXCESS OFCONDENSATION MAY BUILT UP IN THE TANK. WHEN THIS HAPPENS, IN THE DISPLAYAPPEARS , INDICATING THAT THE TANKSHOULD BE EMPTIED.WHENEVER CONDITIONS OF HIGH HUMI-DITY MAKE THE PROBLEM RECURRENT, YOUMAY DISCHARGE THE EXCESS WATERDIRECTLY INTO A DRAIN, USING THE RUB-BER TUBE SUPPLIED; THE TUBE SHOULD BEINSERTED INTO THE HOLE PROVIDED, AFTERHAVING REMOVED THE RUBBER STOPPER.9MAKE SURE THE TANK IS PUT BACK COR-RECTLY OTHERWISE IN THE DISPLAY WILLREMAIN .GB 19-06-2003 9:09 Pagina 12