10Steam stops when the iron is placed upright on the rear rest (therecommended position during pauses in ironing).dRY IROnInG• Set plate temperature as described above.• Move the steam regulator to the position (“dry”).• Wait for the “steam ready” light G to go off.The iron is ready to use.If the fabric to be ironed is slightly damp or you iron fast, you canuse a higher temperature. If, on the other hand, the garmentsare dry or you iron slowly, you are recommended to use a lowertemperature.VeRTICAL IROnInGThis function enables delicate garments to be steamed withoutresting them on the ironing board. Pay particular attention tothe temperature when steaming curtains.• Make sure the steam regulator d is in the position(“dry”) (fig. 1).• Set plate temperature to MAx.• Wait for the “steam ready” light G to go off.• Hold the iron vertically and move it near the garment.• Press and release the Turbo button (L).For correct vertical ironing, wait a few seconds between oneburst of steam and the next until the “steam ready” light G goesoff.Danger of burns!Never direct the “vertical” steam jet at a garment hanging in awardrobe or worn by a person.Vertical ironing should always be carried out with the garmenthanging on a clothes stand and always away from othergarments, elements, people and animals.