DeLonghi ONE On-Off 7K Operating And Installation Manual

Also see for ONE Inverter 12K: OPERATING AND INSTALLATION Manual

Contents

DeLonghi ONE On-Off 7K Operating And Installation Manual Manual pdf 10 page image

ON OFF!ON OFF!SINGLE SPLIT 9ENGLISHINTELLIGENT REMOTE CONTROL88:88PMAMON TIMEROFF TIMERINTELLIGENT REMOTE CONTROLF-LOGICB-LOGICINTELLIGENT REMOTE CONTROL23°CONMODEOFF+-ONMODEOFF+-INTELLIGENT REMOTE CONTROL21°CThe heating function allows the air conditioner to be startedand used as a producer of hot air.To activate the heating function (HEAT), press the MODEbutton until the symbol ( ) appears on the display.To change the temperature value, use the (TEMP UP e TEMPDN). buttons. Each time the buttons are pressed the settemperature value increases or decreases by 1°C.The appliance is fitted with a Hot Start function, which de-lays appliance start-up for a few seconds to ensure an im-mediate output of hot air.The cooling function allows the air conditioner to be startedand used as a producer of cool air.To activate the cooling function (COOL), press the MODEbutton until the symbol ( ) appears on the display.To change the temperature value, use the (TEMP UP andTEMP DN). buttons. Each time the buttons are pressed theset temperature value increases or decreases by 1°C.Automatic switching-onTo set the automatic switching-on of the air conditioner,proceed as follows:- With the appliance switched off, press the button TIM-ER ON ( ).- Set the automatic switching-on time using the andbutton.- Press the TIMER ON button within 10 seconds to con-firm otherwise the function will exit from time setting.Note: to cancel the function setting, press the TIMER ONbutton again.Automatic switching-offTo set the automatic switching-off time, proceed as follows:- Press the TIMER OFF ( ) button.- Set the automatic switching-off time using the andbutton.- Press the TIMER OFF button within 10 seconds to con-firm, otherwise the function will exit from time setting.Note: to cancel the function setting, press the TIMER OFFbutton again.Before setting the timer, ensure that the time on theremote control is set correctly. If it is not, consult theinstructions given on page 6.Note: it is also possible to set the appliance switch-ing-on and switching-off time so as to define a spe-cific duration of operation.Note: the appliance will start in the mode of operation thatwas selected before switching off.B LogicF LogicCOOLING MODE USERHEATING MODE USERTIMER MODE USER