DeLonghi PAC WE 110 Instructions For Use Manual

Also see for PAC WE 110: Instructions for use

Contents

DeLonghi PAC WE 110 Instructions For Use Manual Manual pdf 5 page image

5• If you have a sash window, place the win-dow bracket (T) on the window sill, extendthe window bracket fully within the windowframe, fix the window bracket by using thelocking pin then lower the window onto thewindow bracket. Insert the window outlet(N) of the exhaust hose (K) into the slot, thenconnect the hose to the air conditioner (fig.4).• Thanks to the locking pins, it’s possible touse the window bracket also for sliding win-dows. Position the hole of the window bra-cket so to allow a correct installation of theexhaust hose (see figure 5).PREPARING fOR USEThe instructions below will enable you to prepareyour air conditioner for operation as efficientlyas possible.Before use, make sure the air intake and outletgrilles are unobstructed.Air-conditioning without installationJust a few simple steps and your comfort is en-sured with your appliance:• Fit the air exhaust hose in the housing at theback of the appliance (fig. 1).• Fit the window outlet (N) to the end of thehose (K).• Place the air conditioner near a window orFrench window.• Adjust the length of the hose to reach thewindow.• Make sure the air exhaust hose is unobstruc-ted.• Open the window or French window slightlyand position the outlet (fig. 2).• If you have a double window, use the sucker(Q) provided to hold the two parts of the win-dow together (fig. 3).121223145