DeLonghi PALACE 1800/2 Instruction And Installation Booklet

MANUFACTURER’S DETAILSDear customer,thank you for having chosen us. Before installing and/or using the product, please read this manual on installation,use and correct maintenance carefully.DE’LONGHI’S RADIATOR: DL RADIATORS Srl Via delle Industrie, 2, Fossalta di Piave, 30020 ITALYSALES CONDITIONS AND WARRANTYAny complaint due to manufacturing defects and / or defects in goods’ quality must be written exposedto DL RADIATORS srl, under penalty of forfeiture within eight days of receiving the products in case of faultsand / or visible defects, and within eight days from the discovery of defects and/or defects if they are hidden.DL RADIATORS srl radiators are guaranteed 15 years from the manufacturing date. This guarantee consistsin the replacement of those elements that, due to defects in materials or manufacturing, turn out to beuseless and under condition that the system is executed in a workmanlike manner, in accordance withcurrent standards.DL RADIATORS srl declines all responsibility in case of accidents deriving from a use of theradiator that does not comply with these instructions for use. All radiators produced by DL RADIATORS srlare rigorously tested according to current standards before leaving the factory.DL RADIATORS srl reserves the right to introduce the technical and construction changes it deems necessarywithout notice obligations.Declaration of Conformity: The radiator, produced by the company DL RADIATORS srl complies with theessential requirements of Regulation (EU) No. 305/2011.MATERIALS CONTAINED IN THE PACKAGEA B C DE[Fig. 1]x 1 Radiator x 1 Airvent x 1 Closing capFx 8 Screws Ø 4,5*60 mm x 8 Wall plugs Ø 8*50 mmx 4 BracketsThe following elements are not pre-assembled on the radiator.[Fig. 2]G H ISuitable O-Ring valves Electric drill Ø 8 mm Phillips head screwdriverJ KTape measure LevelTOOLS REQUIRED FOR INSTALLATION- Material Recycled aluminium.- Max. operating pressure 20 Bar.- Packaging the radiator is wrapped in a protective film and inserted in a cardboardbox (attention in the box there are brackets for wall mounting).TECHNICAL SPECIFICATIONSCONNECTIONS[Fig. 3 connections nr. 1, 2, 3, 4]STANDARD CONNECTIONS: bitube system;4