DeLonghi Radia S TRRS Series Manual

ELECTRICAL CONNECTIONA) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug shouldbe cut off from the mains lead, and an appropriate plug fitted, as below. WARNING: Very carefully dispose of the cut offplug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard.With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In theevent of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nearestelectrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug.B) If your appliance is not fitted with a plug, please follow the instructions provided below:WARNING - THIS APPLIANCE MUST BE EARTHEDIMPORTANTThe wires in the mains lead are coloured in accordance with the following code:Green and yellow: EarthBlue: NeutralBrown: LiveAs the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in yourplug, proceed as follows:The green and yellow wire must be connected to the terminal in the plug marked with the letter E or the earth symbolor coloured green or green and yellow. The blue wire must be connected to the terminal marked with the letter N or colouredblack.The brown wire must be connected to the terminal marked with the letter L or coloured red.13

/ 14

Related manuals for DeLonghi Radia S TRRS Series