DeLuxe Stitcher StitchMaster SM-A25 Operation And Maintenance

DeLuxe Stitcher StitchMaster SM-A25 Operation And Maintenance Manual pdf 14 page image

14Stitching ProcessThe StitchMaster has been designed to accommodate a variety of jobs. For this reason, adjustablework tables and work stops have been installed on the StitchMaster. The following is a brief explana-tion of the options available on the machine.Pull the Table Adjustment Handle to the left and lift the Front Work Table to the flat position. Pullthe Rear Work Table up until the spring pops into the holes in the back of the Front Work Table.Note: You may have to push the springs, slightly to clear the Front Table. (see Figure 8)Push the Springs back into the holes in the underside of the Front Table (MG10083A) with yourthumbs, allowing the Rear Work Table (MG10091A) to drop out of the way. Be sure that the TripSwitch Assembly (MG10106A) is adjusted just inside the Rear Work Table so that it does not hit theFront Work Table or the Clincher Arm (MG10052A) as the Rear Work Table is lowered. After theRear Work Table is out of the way, pull the Table Adjustment Handle (MG10097) to the left and dropthe Front Work Table into the saddle position.Saddle Stitching (Figure 8)Flat Stitching (Figure 8)Figure 8 - Saddle and Flat StitchingMg10091AMg10083AMg10106AMg10097 Mg10052ASPRINgSPRINg