DeLuxe Stitcher StitchMaster SM-A25 Operation And Maintenance

DeLuxe Stitcher StitchMaster SM-A25 Operation And Maintenance Manual pdf 6 page image

Carefully inspect the condition of the shipping container before unpacking your StitchMaster. If thecontainer is broken or damaged and there is evidence that the machine may be damaged, immediatelynotify the carrier who delivered the stitcher and the DeLuxe Stitcher Graphic Arts Representative fromwhom the machine was purchased.Installation6Pre-InspectionAs you carefully unpack the machine, check to make sure all components were delivered and are ingood working order. Use Figure 2 in this manual for reference to the following pieces:• StitchMaster complete with 26-style Head and manual• Foot Switch with a Guard and Cord (PG10230)• Wire Spool (25G5 or 2125G5 - optional) on a Spool Shaft (MG10110)• Spool Cradle (MG10113)• Trip Switch Assembly (MG10106A)• Wire Guide Spring (MG10009A)• Front Table (MG10083A) with Side Stop Rod Guides (PG10081 and PG10082) andSelf Lock Pins (PG10242)• Rear Table (MG10091A)• Driver Release Pin (5160)• 1/8” Hex Key Wrench (PG10293)• Stitch samplesNote: Check the nameplate on the back of thestitcher to verify the operating voltage meets yourrequirements.InspectionYou may mount the StitchMaster by clamping itto a secure work-table or to a StitchMaster FloorStand (an optional purchase) as shown. Makesure that the table you choose is sturdy and heavyenough to support the weight of the StitchMaster.Tables which are not suitable will have a ten-dency to tip forward onto the operator. Place themachine where the operator will have sufficientlight and working space. Make sure the ClincherArm Knob (P3793) is turned tightly to secure theMachine to the work surface.Mounting (Figure1)Figure 1 - MountingP3793FSk1